|
Seminar Information |
|
October 2004 |
|
|
Organizer:
VINAS Co., Ltd.
Co-organizer: SGI Japan, Ltd. |
|
We are pleased to announce the
details for upcoming "CAE/CFD Revolution 2004 Autumn" Seminar.
As the importance of utilization of digital engineering technologies such as
CAE/CFD increase, so does the emphasis on capabilities to handle larger data,
faster calculation speed and data sharing among different departments in CFD,
structural and acoustic analyses. Furthermore, the importance of security administration
of digital design information is also increasing recently.
Considering the above situation, VINAS is improving the quality of services to
our clients in enhancing their digital engineering environment, through systemization
and automation of expert know-how, development of high-speed calculation technology,
visualization of large data, as well as provision of cutting-edge turbo machinery
analysis solution.
At this seminar, we will present the latest information about our products, and
introduce customer application examples.
Please plan to join us for this seminar!
Yasuhiko Fujikawa
President
VINAS Co. Ltd.
|
|
Photo:"CAE/CFD
Revolution 2004 Spring"Seminar held in May 2004. |
|
<<Next Generation
CFD VR Post-Processor "FieldView eXtreme" Demonstration/Presentation>>
(*at Tokyo seminar only) |
* Premiere
Presentation in Japan*
Next Generation CFD VR Post-Processor "FieldView eXtreme"
Enjoy the impressive large-screen 3D images output from 3 pipes!
> learn more
|
|
|
Product
Information: |
TOSCA V5.0 (Non-parametric structural
optimization system)
FieldView V10 (Intelligent post-processor
for fluid analysis)
Gridgen V15 ( CFD/CAE mesh generator)
FINE/Turbo V7 ( Fast and accurate turbo machinery fluid-heat analysis
system)
Super Matrix Solver (Fast and robust matrix solver series)
HEXPRESS V2 (Fully automatic hexa-mesh generator) |
|
Place,
Date and Time: |
Osaka |
November 4, 2004 (10:00-17:00; doors open
at 9:30)
Herbis Osaka 11th Floor, SGI Japan, Ltd., Seminar Room |
Tokyo |
November 10 , 2004 (9:30-17:00; doors open
at 9:00) Reception from 17:00
YEBISU GARDEN PLACE TOWER B1F, SGI Hall |
Nagoya |
November 12, 2004 (10:00 -17:00; doors
open at 9:30)
Daini Toyota Building West 8th floor, Meeting Room 801 |
|
Note:
guest speakers at Tokyo only. |
|
Guest Presentations (*Tokyo
only) |
Title: Research related
to ship hydrodynamics |
Speaker:
Mr. Takanori Hino
Chief, CFD Research and Development Center
National Maritime Institute |
|
Summary: Status and
topics of CFD, which is used to predict hydrodynamic
characteristics of ships in design phase, and summary
of technology development at National Maritime Research
Institute.
|
|
|
Title: Example of utilization
of FieldView at Mechanical Engineering Research Laboratory,
Hitachi Ltd. |
Speaker:
Masayuki Kaiho, Dr. Eng.
Chief Researcher, Mechanical Engineering Research Laboratory
Hitachi, Ltd. |
|
Summary: Example of utilization of
FieldView in thermal fluid-dynamic analysis in various
fields. |
|
|
Title: Non-linear numerical electromagnetic
filed analysis for superconductors |
Speaker:
Naoyuki Amemiya, Dr. Eng.
Associate Professor, Dept. of Electrical and Computer Engineering
Yokohama National University |
Summary:Examples of numerical electromagnetic
analysis of superconductors, which are believed to have
non-linear conduction characteristic; and issues issues
related with simultaneous linear equation systems that
are derived from the analyses
|
|
|
Presentation by Co-organizer: |
Title: Trend of HPC in automobile
industry |
Speaker:
Mr. Yasuhiro Amano
Senior Specialist, HPC Consulting Center
SGI Japan, Ltd. |
Summary: Trends, application fields
and Top 500 for HPD (High Performance Computing) in worlds'
automobile industry. |
|
|
Admission: |
Free admission |
Organizer: |
VINAS Co., Ltd. |
Co-organizer: |
SGI Japan, Ltd. |
|
|
|
"CAE/CFD Revolution 2004 Autumn"Seminar Program |
|
- Program for Tokyo Seminar on
November 10, 2004
- Programs for Osaka Seminar on November 4,
and Nagoya Seminar on November 12, 2004 |
|
Program
for Tokyo Seminar on November 10, 2004 |
Time |
Title |
Description |
Presenters |
9:00-9:30 |
Registration |
9:30-9:45 |
Introduction |
Current events at VINAS and strategies for
expansion and upgrading of services to our clients. |
Yasuhiko Fujikawa,
President,
VINAS Co., Ltd. |
9:45-10:05 |
HEXPRESS V2
(Fully automatic
hexa-mesh generator) |
Improvement of efficiency and accuracy of design with automatic
grid generation of hexahedral unstructured mesh |
Hiroshi Kawahara,
CFD Technical Division,
VINAS Co., Ltd. |
10:05-10:35 |
Super Matrix Solver:
Application example for calculation acceleration |
Non-linear numerical electromagnetic
filed analysis for superconductors |
Dr. Naoyuki Amemiya,
Associate Professor, Dept. of Electrical and Computer Engineering
Yokohama National University |
10:35-11:05 |
Fast and robust matrix solver
Super Matrix Solver |
Application of Super Matrix Solver to structural, magnetic
fields and other analyses |
Akihiro Ida,
Assistant Manager,
Project Development Department, VINAS Co., Ltd. |
11:05-11:30 |
Engineering Database and Security Management |
Research and development services that promote streamlining
of research and design |
Takashi Ishigami,
Director, Project Development Department, VINAS Co., Ltd. |
11:30-11:50 |
Presentation by
Co-organizer |
Trend of HPC in automobile industry |
Mr. Yasuhiro Amano
Senior Specialist,
HPC Solution Implementation for MFG,
HPC Consulting Center,
SGI Japan, Ltd.
|
11:50-13:00 |
Lunch & Demo
Time
(12:30-13:00)Next Generation
CFD VR Post-Processor "FieldView
eXtreme" Demonstration/Presentation |
13:00-13:40 |
FieldView Gridgen
Application examples |
Research related to ship hydrodynamics |
Mr. Takanori Hino,
Chief, CFD Research and Development Center,
National Maritime Institute |
13:40-14:10 |
CFD Intelligent
Post-processor
FieldView V10 |
Examples of visualization of CFD large data sets in 64-bit
environment; and FieldView as a tool for knowledge sharing
among design departments |
Hiroshi Kawahara,
CFD Technical Division,
VINAS Co., Ltd. |
14:10-14:50 |
FieldView
Application Example |
Example of utilization of FieldView
at Mechanical Engineering Research Laboratory, Hitachi Ltd. |
Masayuki Kaiho, Dr. Eng.
Chief Researcher,
Mechanical Engineering Research Laboratory,
Hitachi, Ltd. |
14:50-15:20 |
CAE/CFD
mesh generator
Gridgen V15 |
Automation of expert know-how for improving efficiency of
engineering process; and example of hybrid mesh applications
in automobile and aero industries
|
Atsunari Nakano,
CFD Technical Division,
VINAS Co., Ltd. |
15:20-15:40 |
Coffee Break |
15:40-16:10 |
Non-parametric structural
optimization tool
TOSCA V5.0 |
Utilization of non-parametric structural optimization tool;
and application examples in European automobile industry
|
Shinji Morita,
CAE Technical Division,
VINAS Co., Ltd. |
16:10-16:40 |
Fast and accurate turbo
machinery fluid-heat analysis system
FINE/Turbo V7
Comprehensive Turbo machinery CFD Analysis
Software Package
FINE/Design3D |
Trend of CFD design for turbo machinery: Interaction of blade
with cooling, bleed, leakage and heat transfer |
Yoshiyuki Sawa,
CFD Technical Division, VINAS Co., Ltd. |
16:40- |
Q&A |
17:00- |
Reception |
|
|
Programs
for Osaka Seminar on November 4,
and Nagoya Seminar on November
12, 2004 |
Time |
Title |
Description |
Presenters |
9:30-10:00 |
Registration |
10:00-10:15 |
Introduction |
Current events at VINAS and strategies for
expansion and upgrading of services to our clients. |
Yasuhiko Fujikawa,
President,
VINAS Co., Ltd. |
10:15-10:40 |
HEXPRESS V2
(Fully automatic
hexa-mesh generator) |
Improvement of efficiency and accuracy of design with automatic
grid generation of hexahedral unstructured mesh |
Hiroshi Kawahara,
CFD Technical Division,
VINAS Co., Ltd. |
10:40-11:10 |
Fast and robust matrix solver
Super Matrix Solver |
Application of Super Matrix Solver to structural, magnetic
fields and other analyses |
Akihiro Ida,
Assistant Manager,
Project Development Department, VINAS Co., Ltd. |
11:10-11:40 |
Engineering Database and Security Management |
Research and development services that promote streamlining
of research and design |
Takashi Ishigami,
Director, Project Development Department, VINAS Co., Ltd. |
11:40-12:00 |
Presentation by
Co-organizer |
Trend of HPC in automobile industry |
Mr. Yasuhiro Amano
Senior Specialist,
HPC Solution Implementation for MFG,
HPC Consulting Center,
SGI Japan, Ltd.
|
12:00-13:30 |
Lunch & Demo
Time |
13:30-14:10 |
Non-parametric structural
optimization tool
TOSCA V5.0 |
Utilization of non-parametric structural optimization tool;
and application examples in European automobile industry
|
Shinji Morita,
CAE Technical Division,
VINAS Co., Ltd. |
14:10-15:00 |
Fast and accurate turbo
machinery fluid-heat analysis system
FINE/Turbo V7
Comprehensive Turbo machinery CFD Analysis
Software Package
FINE/Design3D |
Trend of CFD design for turbo machinery: Interaction of blade
with cooling, bleed, leakage and heat transfer |
Yoshiyuki Sawa,
CFD Technical Division, VINAS Co., Ltd. |
15:00-15:20 |
Coffee Break |
15:20-16:00 |
CAE/CFD
mesh generator
Gridgen V15 |
Automation of expert know-how for improving efficiency of
engineering process; and example of hybrid mesh applications
in automobile and aero industries
|
Atsunari Nakano,
CFD Technical Division,
VINAS Co., Ltd. |
16:00-16:40 |
CFD Intelligent
Post-processor
FieldView V10 |
Examples of visualization of CFD large data sets in 64-bit
environment; and FieldView as a tool for knowledge sharing
among design departments |
Hiroshi Kawahara,
CFD Technical Division,
VINAS Co., Ltd. |
16:40- |
Q&A |
|
|
Back to Top |
|
Contact:
VINAS Co., Ltd. Sales Division
TEL: +81-6-6440-8111 FAX:+81-6-6440-8112 URL: /
E-mail: |
|
|