* For engineers who are engaged in design optimization and design automation using CFD. * Showcasing latest technologies to improve fluid dynamic performance of various products * Latest application examples of SCULPTOR software in automobile and aerospace industries are presented.
May 25 - OSAKA, May 28 - NAGOYA, May 30 - TOKYO
Organizer: VINAS Co., Ltd., Co-sponsor:SGI Japan, Ltd.
This seminar has successfully ended. Thank you very much.
Efficiency of design optimization process is becoming an important aspect of engineering. In this seminar, we present technologies that maximize productivity of design optimization based on CFD with different product data sizes and design objectives, as well as their various application examples. You will be presented with methods to improve productivity of design work, including how to use general-purpose design optimization tools in different phases of design process.
One of our presenters, Mr. Robert Perry, Marketing Engineer from Optimal Solutions Software (US), presents the company's SCULPTOR software, which is a CFD mesh morphing and design optimization system, and its application examples in CFD design of racing cars and mass-produced cars.Also presented in this seminar are CFD/structure analysis mesh generator "Gridgen" V15.10, and intelligent post-processor for CFD analyses "FieldView" V12.
Furthermore, you will be presented with other powerful tools that bring your CAE/CFD design performance to higher levels:
- "Alibre Design", 3D-CAD engineering system which supports full 3D-CAD features, structural analyses and 3D PDF output with surprisingly low cost.
- "3D-Printer", full-color rapid prototyping system for CAE.
- CAD data linking by CAD data repair/conversion/viewing tool "TransMAGIC" and Acrobat3D.
We believe this seminar will be a good opportunity for engineers to discover new ideas about how to improve product performances and to enhance product development capabilities.We hope to see you at the seminar.
May 2007
VINAS Co., Ltd.
Yasuhiko Fujikawa, President & CEO
[Related product presentation]
Design optimization system "TOSCA", which was featured in our recent "Efficient Structural Design Optimization" seminar (May 9-10), will also be presented with its application examples in European automobile industry.
May 28 (Mon) 10:30-16:35
[Venue] Nagoya Daiya Building #1 - 3rd floor Meeting Room #131 * Please note that the date for Nagoya seminar has changed from its original plan.
TOKYO
May 30 (Wed) 10:30-16:55
[Venue] YEBISU GARDEN PLACE TOWER B1 floor, SGI Hall
* Registation starts at 10:00 in all three venues.
Organizer:
VINAS Co., Ltd.
Co-sponsor:
SGI Japan, Ltd.
Registration fee:
Free of charge (Participants must pre-register in advance.) * Please note that participation of competing vendors may be declined.
Pre-registration
This seminar has successfully ended.Thank you very much.
[Gridgen V15.10 + Pointwise V16]
Fast mesh generation on complex models by Gridgen and introduction of new version "Pointwise" Konosuke Kitamura, Engineering Department, Process Integration Group, VINAS
[Presentation by FieldView developper](TOKYO Seminar only)
FieldView's expansion into new areas! Mr. Matthew N. Godo, FieldView Product Manager, Intelligent Light (US) *Presented in English
12:15-13:30
Lunch Break and Demonstration
13:30-13:50
[SCULPTOR 2.0]
Fast and high quality mesh morphing and desing optimization system SCULPTOR Yukihiro Yamamoto, Engineering Department,Design Optimization Group, VINAS
13:50-14:10
[SCULPTOR]
Application examples of design optimization by SCULPTOR and optimization engine Yukihiro Yamamoto, Engineering Department,Design Optimization Group, VINAS
14:10-15:00
[Presentation from SCULPTOR developer]
Application examples of SCULPTOR in design optimization Mr. Robert Perry, Marketing Engineer, Optimal Solutions Software (US) *Presented in Japanese
15:00-15:20
Lunch Break and Demonstration
15:20-15:50
- Related product presentation - [TOSCA V6.1]
"TOSCA" - Optimization system adopted by major European automakers - Overview and Application Examples Yusuke Houki, Engineering Department,Design Optimization Group, VINAS
15:50-16:10
[Alibre Design]
Long-awaited engineering tool! - Full feature 3D-CAD plus structural analysis and 3D PDF output in one with very low price! Masaru Ozaki, Sales & Industrial Marketing Department 2, VINAS
16:10-16:25
[3D-Printer]
"3D-Printer" - Full-color rapid prototyping system for CAE Masaru Ozaki, Sales & Industrial Marketing Department 2, VINAS
16:25-16:55
[TransMAGIC R7]
CAD data linking by TransMAGIC/Acrobat3D Hiroyuki Suzuki, Engineering Department,Process Integration Group, VINAS
OSAKA (May 25th) / NAGOYA (May 28th) Seminar - Program
[Gridgen V15.10 + Pointwise V16]
Fast mesh generation on complex models by Gridgen and introduction of new version "Pointwise" Konosuke Kitamura, Engineering Department,Process Integration Group, VINAS
[SCULPTOR 2.0]
Fast and high quality mesh morphing and desing optimization system SCULPTOR Yukihiro Yamamoto, Engineering Department,Design Optimization Group, VINAS
13:30-13:50
[SCULPTOR]
Application examples of design optimization by SCULPTOR and optimization engine Yukihiro Yamamoto, Engineering Department,Design Optimization Group, VINAS
13:50-14:40
[Presentation from SCULPTOR developer]
Application examples of SCULPTOR in design optimization Mr. Robert Perry, Marketing Engineer, Optimal Solutions Software (US) * Presented in Japanese
14:40-15:00
Lunch Break and Demonstration
15:00-15:30
- Related product presentation - [TOSCA V6.1]
"TOSCA" - Optimization system adopted by major European automakers - Overview and Application Examples Yusuke Houki, Engineering Department,Design Optimization Group, VINAS
15:30-15:50
[Alibre Design]
Long-awaited engineering tool! - Full feature 3D-CAD plus structural analysis and 3D PDF output in one with very low price! Masaru Ozaki, Sales & Industrial Marketing Department 2, VINAS
15:50-16:05
[3D-Printer]
"3D-Printer" - Full-color rapid prototyping system for CAE Masaru Ozaki, Sales & Industrial Marketing Department 2, VINAS
16:05-16:35
[TransMAGIC R7]
CAD data linking by TransMAGIC/Acrobat3D Hiroyuki Suzuki, Engineering Department,Process Integration Group, VINAS
